Supero X10SRA - I;O, Booting, and Network Settings

4-24
Supermicro X10SRA/X10SRA-F Motherboard User’s Manual
4-8 I/O
Set all options for the I/O in this section.
SATA
SATA Controller
This item enables or disables the onboard SATA controller supported by
the Intel PCH chip. The options are Enabled and Disabled.
Congure SATA as
Select IDE to congure a SATA drive specied by the user as an IDE
drive. Select AHCI to congure a SATA drive specied by the user as an
AHCI drive. Select RAID to congure a SATA drive specied by the user
as a RAID drive. The options are IDE, AHCI, and RAID.
*If the item above "Congure SATA as" is set to AHCI, the following
items will display:
Support Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages
the power usage of the SATA link. The controller will put the link to
a low power state when the I/O is inactive for an extended period of
time, and the power state will return to normal when the I/O becomes
active. The options are Enabled and Disabled.