Chapter 4: AMI BIOS
4-45
Console Redirection Settings
COM 1
Enable Console Redirection
Select Enabled to enable COM Port 1 Console Redirection, which will al-
low a client machine to be connected to a host machine at a remote site
for networking. The options are Disabled (unchecked) and Enabled
(checked).
*If the item above set to Enabled, the following items will become avail-
able for conguration:
Console Redirection Settings
Terminal Type
This feature allows the user to select the target terminal emulation
type for Console Redirection. Select VT100 to use the ASCII Character
set. Select VT100+ to add color and function key support. Select ANSI
to use the Extended ASCII Character Set. Select VT-UTF8 to use UTF8
encoding to map Unicode characters into one or more bytes. The op-
tions are ANSI, VT100, VT100+, and VT-UTF8.
Bits Per second
Use this item to set the transmission speed for a serial port used in
Console Redirection. Make sure that the same speed is used in the
host computer and the client computer. A lower transmission speed
To Next Page
Loading...
Need help?
General
