3-5
Chapter 3: Troubleshooting
Question: Why do I get an error message “IASTOR.SYS read error” and "press F6
to install Intel RAID driver" when installing Windows on my motherboard?
Answer: To solve this issue, disable the IPMI jumper (if your motherboard has this
feature). Another solution is to use a USB oppy drive instead of the onboard oppy
drive. For the IPMI jumper location, please check Chapter 1.
Question: What is the heatsink part number for my X9SRL Series motherboard?
Answer: For the 1U passive heatsink, ask for SNK-P0047P. For the 3U active
heatsink, use SNK-P0050AP4.
Question: Why can't I recover the BIOS even when I’ve followed the instructions
in the user’s manual for the motherboard?
Answer: Please disable the IPMI jumper and try it again. For the jumper location,
please check Chapter 1.
To Next Page
Loading...
Need help?
General
