25
i
EN
Mounting on window frames, etc.
Weak window frames may break
◆ When mounting on window frames, please check their structure and load capacity.
Especially when mounting onto designs made of synthetic materials, the fastening
screws must be screwed tight and must not loosen during operation.
◆ If required, ask your window manufacturer before fastening the belt winder onto
a window frame made of synthetic materials.
8. Surface mounting
3.
Insert the required belt inlet. Belt inlet for:
Standard belt
23 mm
Mini belt
15 mm
4.
Use the provided mounting holes.
This will ensure the correct functioning
of the respective belt.
Two mounting holes are required to
fasten the belt winder.
Generally, it is possible to make use of
the existing installation holes to screw
the wall bracket in place. If not, draw on
the required mounting holes.
To Next Page
Loading...