10
i
EN
Only use the electronic roller shutter belt for opening and closing at roller shutters
with a permissible belt.
IMPORTANT
Mechanical locks of any kind are not suitable for automated operation with this device.
Only use the manufacturer's original spare parts.
◆ By doing so, you avoid risk of malfunctions and damage to your superrollo GW60.
◆ Only use the original mains adapter (type YS35-29240)
◆ As the manufacturer, we provide no guarantee for the use of third-party components
and accept no liability for consequential damage resulting from such.
◆ All repairs to the superrollo GW60 must be undertaken by authorised customer
service personnel.
Operating conditions
◆ Only operate the superrollo GW60 in dry rooms.
◆ An easily accessible 230 V/50 Hz mains socket must be available at the installation site.
◆ The roller shutters must run up and down smoothly. It should not jam.
◆ The mounting surface for the superrollo GW60 must be at.
4.1 Intended use
The superrollo GW60 may be damaged if excessively long belts are used.
◆ Only use belts of the permissible lengths.
To Next Page
Loading...
Need help?
General