Superrollo GW60 - Automatic Mode: Setting Opening and Closing Times

36
i
EN
1.
Open the roller shutters.
or or or
12. Automatic mode; conguring the opening and closing times
The same switching times every day of the week.
You can set an opening and closing time for your belt winder which will apply to all days
of the week. Once this time is reached, the roller shutters will open or close automatically.
Changing the switching times
You can change the switching time settings at any time. Please note that each new setting
deletes the previous setting.
NOTE
◆ In order to set the switching times, you must carry out this step once at the time
that the roller shutters are to open or close. For example, carry out the step at 8:00
o' clock in the morning if you want the roller shutters to open at 8:00 AM every day.
◆ You must set at least one switching time, in order that automatic mode is activated.
◆ Your changes will not be executed until the next day when you congure opening
and / or closing times.
2.
Stop the roller shutters in the
interim.
3.
Close the roller shutters.
11. Manual operation
i
Briey pressing the button causes the
roller shutters to move to the upper
end point.
Briey press any random button.
Briey pressing the button causes the
roller shutters to move to the lower
end point.