EasyManua.ls Logo

Superrollo GW60 User Manual

Superrollo GW60
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Surface mounting Flush mounting
EN Electronic Roller Shutter Belt Winder superrollo GW60
Translation of the Original Operating and Assembly Manual
BA10060-2 (03.16)
Item no. SR10060 / SR10065

Other manuals for Superrollo GW60

Question and Answer IconNeed help?

Do you have a question about the Superrollo GW60 and is the answer not in the manual?

Superrollo GW60 Specifications

General IconGeneral
BrandSuperrollo
ModelGW60
CategorySwitch
LanguageEnglish

Summary

Included in Delivery

Explanation of Safety Symbols and Depictions

Safety Instructions

Intended Use and Permissible Specifications

Details proper usage, permissible belts, and shutter surface area for safe operation.

Improper Use and Associated Risks

Highlights prohibited uses, such as outdoor operation, and associated life risks.

Functional Description

Safety Function: Obstacle Detection

Explains obstacle detection mechanism and risks of failure.

Safety Function: Overload Cut-off

Describes the overload cut-off system that protects the belt winder from damage.

Safety Instructions for Installation

Flush Mounting Procedure

Surface Mounting Procedure

Checking and Correcting Rotational Direction

Setting the End Points

Setting the Upper End Point

Guides through the process of setting the desired upper limit for the roller shutter.

Setting the Lower End Point

Guides through the process of setting the desired lower limit for the roller shutter.

Automatic Mode: Setting Opening and Closing Times

Configuring Opening Time

Step-by-step guide to set the desired time for automatic shutter opening.

Configuring Closing Time

Step-by-step guide to set the desired time for automatic shutter closing.

Automatic Mode: Auto/Manual Switchover

Automatic Solar Function

Setting the Automatic Solar Function Limit

Guides on setting the current brightness as the limit for the automatic solar function.

Erasing Settings

Removing the Flush-Mounted Belt Winder

Removing Belt from Flush-Mounted Winder on Unit Failure

Procedure for Belt Removal During Unit Failure

Details how to release the drive and pull the belt out when the unit fails.

Removing the Surface-Mounted Belt Winder

Removing Belt from Surface-Mounted Winder on Unit Failure

Procedure for Belt Removal on Unit Failure

Details how to release the drive and pull the belt out when the unit fails.

Troubleshooting Common Issues

Troubleshooting: Functional Issues

Addresses issues like no functions, failure to react to timings, and flashing timer LEDs.

Troubleshooting: Shutter Movement and Solar Function

Covers problems with shutter travel, stopping unexpectedly, and automatic solar function.

Troubleshooting: Obstacles and Overload

Addresses issues like shutters stopping due to obstacles, jamming, or exceeding operational limits.

Maintenance and Care