Superrollo GW60 - Setting the Lower End Point

34
i
EN
+
+
Setting the wrong upper end point
may lead to overload or damage the
superrollo GW60 or the drive.
◆ Do not set the upper end point
right up to the limit stop.
◆ Release the button promptly and
never allow it to extend beyond
the respective end point.
Set the lower end point
3.
Simultaneously press and hold the
buttons.
10. Setting the end points
4.
Release the buttons...,
The roller shutter travels down.
...as soon as the roller shutter reaches
the desired position for the lower end
point. The roller shutter stops and the
lower end point is stored.
IMPORTANT
Please ensure that the belt is not
excessively slack when reaching the
lower end point.