23
i
EN
15.
Mounting the sun sensor.
16.
Commissioning.
17.
Continue with the settings in
chapter 9, see page 32.
7. Flush mounting
Secure the sun sensor to the window
pane using the suction cup. The
position of the sun sensor on the
window pane determines the point
at which the roller shutters will close
to in the event of sunlight.
Plug in the mains adapter into the
230 V / 50 Hz mains socket. This com-
pletes the installation process.
IMPORTANT
The mains socket and mains adapter
must be easily accessible at all times.
To Next Page
Loading...