To Next Page
J
Jack EnglishSep 10, 2025
What to do if the display on my SureShot AC230 door is blank?
- RRuth TurnerSep 12, 2025
If the display on your SureShot Dispenser door is blank: 1. Ensure the door cable is securely installed in the bottom of the dispenser door. 2. Verify the valve is working correctly: a. Install a dispense tube in the valve. If a dairy bag is not loaded, use a spare piece of tube. Place an empty cup under a dispense point (valve). Press any button that dispenses product. The solenoid should make a noise as it opens and closes verifying the plunger is moving freely. b. If the solenoid doesn't respond, review all steps under “Dispenser does not turn on”. c. If the solenoid responds, the display may be faulty. Please call technical assistance.
General
