Suunto AMBIT - Backlight and Button Lock

[View]:
●
change views in TIME mode and during exercise
●
keep pressed to invert the display from light to dark and vice versa
[Back Lap]:
●
return to the previous step
●
add a lap during exercise
TIP: When changing the values, you can increase the speed by keeping [Start
Stop] or [Light Lock] pressed until the values start to scroll faster.
4.1 Using backlight and button lock
Press [Light Lock] to activate the backlight. The backlight stays on for five
seconds. For information on the backlight settings, see Chapter 13 Adjusting
settings on page 63.
Keep [Light Lock] pressed to lock or unlock the buttons. When the buttons are
locked, is shown on the display.
TIP: Lock the buttons to avoid accidentally starting or stopping your log. When
the buttons are locked, you can still activate the backlight by pressing [Light Lock],
change between the displays by pressing [Next] and views by pressing [View].
10