TIP: You can also check your location while you are recording an exercise by
keeping [Next] pressed to access the exercise options.
8.3 Adding waypoints
Suunto Ambit allows you to save your current location as a waypoint. You can
store up to 100 waypoints in the device.
You can select a waypoint type (icon) and waypoint name from a pre-defined
list and freely name the waypoints in Movescount. The pre-defined icons are
listed in Chapter 15 Icons on page 72.
To save a location as a waypoint:
1. Press [Start Stop] to enter the exercise menu.
2. Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3. Enter Location with [Next].
4. The device starts searching for a GPS signal and displays GPS found after
acquiring the signal. After that your current coordinates are shown on the
display.
5. Press [Start Stop] to save your location as a waypoint.
6. Scroll through the different waypoint types with [Start Stop] or [Light Lock].
Select a suitable waypoint type with [Next].
7. Scroll the waypoint name options with [Start Stop] or [Light Lock]. Select
a suitable name with [Next].
8. Click [Start Stop] to save the waypoint.
26
To Next Page
Loading...
