Suunto AMBIT - Navigating to a Waypoint

TIP: You can create waypoints in Movescount by selecting a location on a map
or inserting the coordinates. Waypoints in your Suunto Ambit and in Movescount
are always synchronized when you connect the device to Movescount.
8.4 Navigating to a waypoint
Suunto Ambit includes GPS navigation which enables you to navigate to a
pre-defined destination stored as a waypoint.
To navigate to a waypoint:
1. Press [Start Stop] to enter the exercise menu.
2. Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3. Scroll to Waypoints with [Light Lock] and enter with [Next]. The number
of saved waypoints and free space available for new waypoints is displayed.
4. The waypoints are grouped by date. Scroll to the date of the waypoint with
[Start Stop] or [Light Lock]. Select with [Next].
5. Scroll to the waypoint you wish to navigate to with [Start Stop] or [Light
Lock] and select with [Next].
6. Select Navigate with [Next]. The device starts searching for a GPS signal
and displays GPS found after acquiring the signal.
7. Start navigating to the waypoint. Suunto Ambit displays the following
information:
●
arrow pointing to the direction of your destination (turn left/right
indicator)
28