NOTE: Navigation shows the deviation from the north arrow of the watch
bezel in low speeds (<10 km/h) and the deviation from course direction in high
speeds (>10 km/h). When standing still, you can rotate the device until you see 0
indicating the correct direction. When riding a bike, you do not rotate the device,
but you will see 0 on the display when going straight towards the target.
NOTE: You can also navigate when you are recording an exercise.
8.5 Deleting a waypoint
To delete a waypoint:
1. Press [Start Stop] to enter the exercise menu.
2. Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3. Scroll to Waypoints with [Light Lock] and enter with [Next].
4. The waypoints are grouped by date. Scroll to the date of the waypoint with
[Start Stop] or [Light Lock]. Select with [Next].
5. Scroll to the waypoint you wish to delete with [Start Stop] or [Light Lock].
Select with [Next].
6. Scroll to Delete with [Light Lock]. Select with [Next].
7. Press [Start Stop] to confirm.
31
en
To Next Page
Loading...
