later. You can also make laps during recording. Your laps are stored in the
device memory and you can access them later in Movescount. You can view
the lap type, lap number, split time and distance.
To record altitude:
1. Make sure that the Altimeter profile is activated.
2. Press [Start Stop] to enter the exercise menu.
3. Scroll to EXERCISE with [Start Stop] or [Light Lock] and select with [Next].
4. Scroll the exercise modes with [Start Stop] or [Light Lock] and select a
suitable mode with [Next].
5. Wait for the device to notify that the heart rate and/or GPS signal have been
found and press [Start Stop] to start recording the log.
To start recording the log without heart rate and/or GPS signal, select Start
without HR with [Start Stop]. Press [Start Stop] again to start recording the
log.
55
en
To Next Page
Loading...
