EasyManua.ls Logo

Suunto AMBIT - Sleep Mode Operation; Resetting GPS

Suunto AMBIT
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE: Resetting GPS resets GPS data, compass calibration values, alti/baro
graphs and recovery time. However, your recorded logs will not be removed.
NOTE: Service menu content is subject to change without notice during updates.
Sleep mode
You can put your Suunto Ambit into sleep mode, if you are not using it for a
while to save battery duration.
To put the device into sleep mode:
1. In the service menu, scroll to ACTION with [Light Lock] and enter with [Next].
2. Press [Next] to select Sleep mode.
3. Press [Start Stop] to confirm, or press [Light Lock] to cancel.
To activate the device from sleep mode, press any button.
NOTE: The device switches to power saving mode when it is static for 30
minutes. The device re-activates when moved.
Resetting GPS
In case GPS is not working properly, you can reset GPS data in the service menu.
To reset GPS:
1. In the service menu, scroll to ACTION with [Light Lock] and enter with [Next].
2. Press [Light Lock] to scroll to GPS reset and enter with [Next].
3. Press [Start Stop] to confirm GPS reset, or press [Light Lock] to cancel.
Adjusting display contrast
You can increase or decrease the display contrast in the service menu.
67
en

Table of Contents

Other manuals for Suunto AMBIT

Related product manuals