2-14 PERIODIC MAINTENANCE
PROPELLER AND PIN
• Inspect the propeller for bent, chipped or broken blades.
If damage noticeably affects operation, replace.
• Inspect the shear pin for bent or damage.
• Make sure that the cotter pin is installed securely.
ANODE
If 2/3 of the anode has corroded away, replace the anode.
NOTE:
Apply the silicone seal to the anode securing bolts.
99000-31120: SUZUKI SILICONE SEAL
Inspect initially after 20 hours (1 month) and every 100
hours (6 months) thereafter.
Cotter pin
Propeller
!
Shear pin
Inspect every 50 hours (3 months).
Do not paint the anode.
Anode
To Next Page
Loading...
