FUEL SYSTEM 4-5
CARBURETORS
REMOVAL AND INSTALLATION
REMOVAL
1. Remove the motor cover.
2. Remove the recoil starter.
3. Turn the fuel cock “OFF” position.
4. Loosen the screw 1 securing the throttle control inner cable.
5. Detach the choke rod 2 from the carburetor.
6. Remove the two bolts 3 securing the carburetor.
Remove the carburetor assy 4 and the silencer 5.
7. Remove the fuel hose 6 from the carburetor.
Before servicing the fuel system, read and understand
“PRECAUTION ON FUEL SYSTEM SERVICE” in the
previous section.
To Next Page
Loading...
