SYMBOL
Listed in the table below are the symbols indicating instructions and other important information necessary
for proper servicing. Please note the definition for each symbol. You will find these symbols used throughout
this manual. Refer back to this table if you are not sure of any symbol(s) meanings.
SYMBOL DEFINITION SYMBOL DEFINITION
Torque control required.
Data beside it indicates specified
torque.
Apply SUZUKI SILICONE SEAL.
Apply oil. Use the engine oil unless
otherwise specified.
Apply THREAD LOCK “1342”.
Apply SUZUKI OUTBOARD MOTOR
GEAR OIL.
Measure in resistance range.
Apply SUZUKI SUPER GREASE “A”. Measure in continuity test range.
Apply SUZUKI WATER RESISTANT
GREASE.
Use special tool.
Apply SUZUKI BOND “1207B”.
To Next Page
Loading...
