6-12 CHASSIS
• Remove the dust seal
CD
and stopper ring
(2)
.
• Place the front fork
in
a vise with soft jaws.
NOTE:
Clamp
th
e right front fork axle holder
and
the left front fork brake
caliper bracket using the vise.
[A CAUTION I
Do
not over tighten the
vise
or the outer tube will
be
damaged.
• Remove the damper rod bolt using the special tool.
em
09940-54821: Front fork
inn"r
rod
hold"r
•
Remove
thG
damp",r
rod
®
and
rebound
spring
0.
• Slowly pull out the inner tube.
NOTE.
Be careful not to damage the inner tube.
http://www.motorcycle.in.th
To Next Page
Loading...
