REASSEMBLY AND REMOUNTING
Reassemble and remount the rear suspension
in
the reverse
order of
removal and disassembly.
Pay
special attention to the
following points:
SWINGARM NEEDLE BEARINGS
• Apply SUZUKI SUPER GREASE "
A"
to the spacers, dust seals
and
needle
bcoringo
.
For USA
~
99000-25030: SUZUKI SUPER GREASE "A"
For
the
other
countries
.0
99000-25010: SUZUKI SUPER GREASE "A"
• Press the needle bearings into the swingarm pivot using the
special tool.
S 09941-34513:
Steering
outer
race
installer
CUSHION LEVER NEEDLE BEARINGS
• Apply SUZUKI SUPER GREASE "A" to the spacers and
needle bearings.
For USA
.0
99000-25030: SUZUKI SUPER GREASE "A"
For
the
other
countries
.0
99000-25010: SUZUKI SUPER GREASE "A"
• Press the needle bearings into the cushion lever using the
special tool.
I!iiI 09941-34513:
Steering
outer
race
installer
REAR SUSPENSION
• Tighten the cushion lever rod mounting nuts
CD
to the speci-
fied torque.
(!)
Cushion
lever
rod
mounting
nut:
100 N·m (10.0
kgj.m
, 72.5 Ib-ft)
CHASSIS
6-39
http://www.motorcycle.in.th
To Next Page
Loading...
