Suzuki drz 400 2000 - Front and Rear Turn Signal Light

7-30 ELECTRICAL SYSTEM
• Remove the rubber cap.
• Remove the bulb.
• Install the new bu lb in the reverse order of removal.
[ A CAUTiO N]
If you touch the bulb with your bare hands , clean the
bulb with a cloth moistened with alcohol or soapy wa-
ter to prevent premature bulb failure .
FRONT AND REAR TURN SIGNAL LIGHT
Turn signal light : 12 V 21 W
FRONT AND REAR TURN SIGNAL LIGHT BULB
REPLACEMENT
• Remove the front turn signal light lens CD and rear turn signal
light l ens @ .
a
• Remove the front turn signal light bulb G) and rear turn signal . ............. ~' . .... ~
light bulb @.
I ACAUTION I
If you tou c h the bulb with your bar .. hands , clean the
bulb with a cloth moistened with alcohol or soapy wa -
ter to prevent premature bu lb failure .
http://www.motorcycle.in.th