Suzuki drz 400 2000 - Page 212

7-20 ELECTRICAL SYSTEM
Measure the ignition coil primary peak
vo ltage. ( CY 7-21)
NOTE: The ignition coil peak voltage
inspection method is applicable only with the
multi circuit tester
and the peak volt adaptor.
I
I---Correct _--' IL-----j
Inspect the spark plug.
( CY 2-9 and 2-10)
I
I
Correct Incorrect
L __ _ Incorrect - •• Faulty CD unit
Correct
• Faulty spark pluo
Inspect the ignition coil. ( CY 7-22)
Correct
Measure the pickup coil and signal coil peak
voltage and resistance. ( CY 7-22 and 7-23)
• Improper spark plug
connection
Incorrect --- • Faulty ignition coil
NOTE: The pickup coil and signal coil peak I---- Incorrect --- _
• Faulty pickup coil
voltage inspection is applicable only with the
• Faulty signal coil
multi circuit tester and the peak volt adaptor.
L-- _____ -, ______ _ ~
Correct
L --- ---- ---------- _ . Open circuit in wiring
harness.
• Improper ignition coupler
connection
http://www.motorcycle.in.th