VALVE
GUIDE SERVICING
•
Drive the valve guide out toward the camshaft side using the
valve guide remover.
S 09916-44310: Valve guide remover/installer
NOTE:
* Discard the removed valve guide.
* Only oversized valve guides are available as replacement
parts
.
• Refinish the valve guide holes
in
the cylinder head using the
v~lvA
Qu
irtA
rp.:=!mAr
::Inri
h;
:mrllp.
S 09916-34580: Valve guide reamer (10.8 mm)
09916-34542: Reamer
handle
•
Oi
l the stem hole of each valve guide and drive t
he
guide into
the guide
hole using the valve guide installer and attachmen
t.
S 09916-44310: Valve guide removerlinstaller
09916-53360: Valve guide installer attachment
l
11
CAUTI
Qi\/]
Failure to oil the valve guide hole before driving the
new guide into
place
may
result
in
a damaged guide or
head.
• After fitting t
he
valvo
guido
n,
rcfinioh their guiding
borco
with
the valve guide reamer. Be sure to clean and oil the guides
a
ft
er reaming.
S 09916-34570: Valve guide reamer (5.0 mm)
09916-34542: Reamer
handle
ENGINE
3-
25
http://www.motorcycle.in.th
To Next Page
Loading...
