19
RIGHT/DROIT
LEFT/GAUCHE
Loosen the axle holder bolts.
Remove the front axle from the fork legs.
A: Axle holder bolt
B: Front axle
Mount the front wheel assembly properly.
A: Right fork leg
B: Left fork leg
C: Front axle
D: Front wheel spacer
E: Axle nut (18 mm flange nut)
Attach the front wheel spacers to the front wheel hub.
!
A: Spacer
Remove the supporter from the brake pad of the front
brake caliper.
Carefully insert the front brake disc plate between the
caliper brake pads.
A: Supporter
B: Disc plate
C: Pads
The large flange of the spacer faces the hub.
When attaching the spacer, be carefull not to
scratch the oil seal lip.
To Next Page
Loading...
