21
Insert the front axle from the right side of fork leg and
fix the front wheel assembly to the front fork.
!
A: Front axle
Tighten the front axle nut to the specified torque.
"
""
" Front axle nut: 35 N·m (3.5 kgf-m)
A: Axle nut
STAND
Insert the boss of stand to the hole of rear axle shaft.
A: Stand
Place the motorcycle on the stand, then remove the
hoist hook.
Never use force to install the front axle.
If it cannot be installed by hand, it is not cor-
rectly aligned.
To Next Page
Loading...
