39
RADIATOR
Keep the motorcycle upright.
Remove the radiator cap and check the coolant level.
The engine coolant should be kept filled to bottom of
the filler neck. If level is lower than this level, add a
50:50 mixture of engine coolant and distilled water to
the correct level.
#
Close the radiator cap securely.
A: Radiator cap
Test ride the motorcycle checking all mechanical
functions. Tighten all nuts, bolts, and miscellaneous
mounting parts to the proper torque specs. Confirm
that all cables and wiring harnesses are connected
and routed correctly.
!
!
Do not open the radiator cap when the engine
is hot as you may be injured by escaping hot
liquid or vapor.
Use 30 : 1 pre-mixture of unleaded gasoline
minimum 90 pump octane (R/2+M/2) and oil.
For the oil to be mixed with gasoline, any of
the following brands or its equivalent will do.
*MOTUL 800 2T
Do not allow two different brands to get mixed
in the fuel-oil mixture.
To Next Page
Loading...
