10
STAND
Insert the boss of stand to the hole of frame as shown
in the photograph.
A: Stand
Place the motorcycle on the stand, then remove the
hoist hook.
LEFT RIGHT
FRONT FORK PROTECTOR
Install the front fork protector to the front fork.
A: Front fork protector
B: 6 × 10 mm flange bolt
C: Left fork leg
D: Right fork leg
BRAKE HOSE CLIP
Align the groove of front brake hose with the groove of
brake hose clip.
Install the brake hose clip to the front fork protector.
A: Brake hose clip (Inner)
B: Front brake hose
C: Groove
D: Brake hose clip (Outer)
E: Front fork protector
F: 6 × 16 mm flange bolt
To Next Page
Loading...
