What to do for needle bar stop position error on SWF SB Sewing Machine?
To correct the needle bar stop position error, manually turns the needle bar to check the load of the needle bar, and properly place the needle bar.
How to fix error in the main shaft encoder Z of SWF SB Sewing Machine?
To address the error in the main shaft encoder Z, check the encoder's cable connection, and turn off and again the main switch.
How to fix sequin design error on SWF SB Sewing Machine?
To address the sequin design error, amend the design.
How to troubleshoot Y-axis driver error on SWF Sewing Machine?
To solve the Y-axis driver error, turn off and on the main switch.
How to troubleshoot X-axis driver error on SWF Sewing Machine?
To solve the X-axis driver error, turn off and on the main switch.
What to do if diskette removed from FDD of SWF Sewing Machine?
If the diskette was removed from FDD, insert the diskette and start are work again.
What to do if there is no design data in the diskette of SWF SB?
If there is no design data in the diskette, replace the diskette.
How to fix main shaft motor driver error on SWF SB Sewing Machine?
To resolve the main shaft motor driver error, turn off and on the main switch.
What causes main shaft motor overload error on SWF SB?
If a thread tangles the hook, when the needle bar's control body is bad, and when the thread becomes tangled during trimming, check the hook of the front head, and turn off and on the main switch.
How to fix bad memory battery on SWF SB?
If the battery is exhausted when the power is off or the status of saving the number of stitches and the x, y position information is unstable, call the A/S center at the nearest to your place and replace the battery. If this error frequently occurs, you need to replace the CPU board.
General| Brand | SWF |
|---|---|
| Model | SB Series |
| Category | Sewing Machine |
| Language | English |
Details the components and functions of the Operation Box, including the LCD screen and various keys.
Provides instructions on how to power on the SWF embroidery machines for SB, Multi-Head E-Series, and DM Series.
Covers the process of installing the SWF operating program, including backup and system settings.
Details the steps for installing the embroidery operating program using floppy diskette or USB.
Explains how to back up the operating program and data files to a floppy diskette or USB memory.
Covers memory format and setting initialization functions for the operating program.
Guides on adjusting machine settings and conducting basic specifications setup.
Explains how to call embroidery designs from memory, copy, delete, or export them.
Details importing designs from external devices like floppy diskette, USB, CF card, or serial.
Covers the main setting menu with seven sub-menus for various machine configurations.
Enables embroidering single or multiple designs repeatedly within one frame.
Provides tools for editing embroidery designs, including stitch, divide, filtering, and zoom.
Accesses machine maintenance functions like service, information, test, and origin.
Logs and displays up to ten recent error messages for troubleshooting.
Lists common error messages, their descriptions, and recommended handling procedures.
Details error messages related to the main shaft motor and other components.
Covers error messages and handling for X and Y axis motor-related issues.
Troubleshoots errors related to floppy diskettes and communication interfaces.
Covers memory-related errors, including data absence, capacity, and battery issues.
Addresses common problems with USB memory recognition and usage.
Provides instructions on how to install and replace fuses in the embroidery machine.
To Next Page
