To Next Page
S
Samantha GardnerAug 31, 2025
What to do if there is no design data in the diskette of SWF SB?
- CChristopher SmithAug 31, 2025
If there is no design data in the diskette, replace the diskette.
What to do if there is no design data in the diskette of SWF SB?
If there is no design data in the diskette, replace the diskette.
How to fix main shaft motor driver error on SWF SB Sewing Machine?
To resolve the main shaft motor driver error, turn off and on the main switch.
What causes main shaft motor overload error on SWF SB?
If a thread tangles the hook, when the needle bar's control body is bad, and when the thread becomes tangled during trimming, check the hook of the front head, and turn off and on the main switch.
How to fix bad memory battery on SWF SB?
If the battery is exhausted when the power is off or the status of saving the number of stitches and the x, y position information is unstable, call the A/S center at the nearest to your place and replace the battery. If this error frequently occurs, you need to replace the CPU board.
What causes pulley ratio error on SWF SB Sewing Machine and how to resolve it?
If the set pulley ratio is wrong, change the driver setting after checking the main shaft pulley ratio.
What causes AC Line error on SWF SB and how to fix it?
If a problem occurs on the joint board, replace the joint board.
What to do if there are no sectors on the diskette of SWF SB?
If a floppy diskette is not formatted or the format is different, format the diskette or replace it with another one.
What to do if 100 memory rooms are full on SWF SB?
If the 100 memory rooms are full with saved designs, you should delete unnecessary data.
General| Brand | SWF |
|---|---|
| Model | SB Series |
| Category | Sewing Machine |
| Language | English |
Details the components and functions of the Operation Box, including the LCD screen and various keys.
Provides instructions on how to power on the SWF embroidery machines for SB, Multi-Head E-Series, and DM Series.
Covers the process of installing the SWF operating program, including backup and system settings.
Details the steps for installing the embroidery operating program using floppy diskette or USB.
Explains how to back up the operating program and data files to a floppy diskette or USB memory.
Covers memory format and setting initialization functions for the operating program.
Guides on adjusting machine settings and conducting basic specifications setup.
Explains how to call embroidery designs from memory, copy, delete, or export them.
Details importing designs from external devices like floppy diskette, USB, CF card, or serial.
Covers the main setting menu with seven sub-menus for various machine configurations.
Enables embroidering single or multiple designs repeatedly within one frame.
Provides tools for editing embroidery designs, including stitch, divide, filtering, and zoom.
Accesses machine maintenance functions like service, information, test, and origin.
Logs and displays up to ten recent error messages for troubleshooting.
Lists common error messages, their descriptions, and recommended handling procedures.
Details error messages related to the main shaft motor and other components.
Covers error messages and handling for X and Y axis motor-related issues.
Troubleshoots errors related to floppy diskettes and communication interfaces.
Covers memory-related errors, including data absence, capacity, and battery issues.
Addresses common problems with USB memory recognition and usage.
Provides instructions on how to install and replace fuses in the embroidery machine.
