Technician Menu Page 19/33
Programming instructions SYCLOPE ODISEA
®
c) To set zero (pH=7)
Calibrate the zero by entering the desired value
d) To perform the gain
Calibrate the gain by entering the desired value
e) To delete the recorded calibration
This process allows you to return to the factory value, which is exempt from calibration.
General settings
Temperature
pH
Rédox
Chlorine
pH calibration
pH=7.00
Gain
Factory values
pH calibration
Standard…: 7.01 pH
pH calibration
pH=7.00
Gain
Factory values
pH calibration
Standard…: 7.31 pH
pH calibration
pH=7.00
Gain
Factory values
pH calibration
pH=7.00
Gain
Factory values
pH calibration
pH=7.00
Gain
Factory values
Calib. in process…
To Next Page
Loading...