Specialist menu Page 28/33
Programming instructions SYCLOPE ODISEA
®
Adjustment of the cycle time
Adjust the value of the cycle
time.
► Follow this same process to adjust the other parameters.
Definition of the direction of pH adjustment
Choose the required adjustment direction.
f) Relay assignment
Allows you to assign the available relays to manage other functions such as:
General alarms
Measurement alarms
Filter timers
Reverse pH direction
Programming controls
Proportional band(s)
Cycle time
pH+/pH- adjustment
Programming controls
Temperature
pH
Redox (ORP)
Chlorine
Temp. adjustment
Cycle time ………..: 120
Programming controls
Proportional band(s)
Cycle time
pH+/pH- adjustment
pH adjustment direction
pH adjustment –
pH adjustment +
Configurations
Filter timers
Flocculant
Meter input
Flow switch
Prog. controls
Prog. relays
Relay assignment
Relay 4
Imp1 relay
Imp2 relay
Relay 4 powered
None
Filter timers
Reverse pH adjustment
General alarms
Temp. alarms
pH alarms
Relay 4 powered
General alarms
Temp. alarms
pH alarms
Redox alarms
Chlorine alarms
Flocculant
To Next Page
Loading...