Table 12-16
Settings > Password
Recommended actionExplanationError messages
Enter a new password.
Passwords with seven characters must
include all of the following requirements while
longer passwords must include at least three:
■ One uppercase letter.
■ One lowercase letter.
■ One number (0-9)
■ One special character (@#$%%^&*(){}[].)
Passwords may begin with an uppercase
letter or they may end with a number.
However, when these characters appear
in those positions, the password is not
considered to meet the minimum
requirements.
The new password does not
contain all the required
parameters.
Supplied password does not meet the
required pattern!
Please contact Symantec Support.The password cannot be reset
due to a technical error.
Failed to reset the password, please
try again. Click ? for more details. If
the error persists, contact Symantec
Technical Support.
Table 12-17 lists the error messages that are common to all the tabs on the
NetBackup Appliance Web Console.
Table 12-17
Common error messages that can appear on the NetBackup
Appliance Web Console
Recommended actionExplanationError
Please restart your web server and try
again.
This is generic error and may appear
if the web server is not responsive.
An unknown error has occurred.
Please contact Symantec Support to
resolve the issue. To continue with the
operations, click any tab.
Please enter the appropriate value and
save again. Please ensure that the
connection to the NetBackup
Appliance Directory is not down.
This icon is displayed next to the field
that does not display the updated
information. This happens when the
entered value has not got updated in
the NetBackup Appliance Directory.
That is the new value does not match
the data store
See “NetBackup status codes applicable for NetBackup Appliance” on page 196.
188NetBackup Appliance error messages
Error messages displayed on the NetBackup Appliance Web Console
To Next Page
Loading...
