Synesso MVP Series

55
This is the system clock screen.
Line 2 allows the operator to set the local me in a 24 hour format.
Line 3 and 4 allow the operator to set the current date.
The date and me are used for both the error log and the power saving mode. A small baery on the power
board should keep the clock and calendar running if the machine loses power, but it will need to be re-
placed eventually. Refer to the markings on the baery for replacement info.
To cycle to the next display screen, press the down buon.
Menu Level 2: System Clock
PROGRAMMING
Menu Level 2: Heang Elements
This screen is available from rmware versions 2.62 and above. For rmware version 2.4 - 2.57, the element
sengs are accessed in menu level 1 as shown on page 42
During certain maintenance procedures or technical troubleshoong, it may be necessary to disable secons
of the machine’s heang system. For proper performance of the machine, all elements should be le acve
during normal operaon.
Line 2 allows the user to deacvate loop 1 of the steam tank heang element.
Line 3 allows the user to deacvate loop 2 of the steam tank heang element.
Line 4 allows the user to deacvate all of the brew tank heang elements.
To cycle to the next display screen, press the down buon.