EasyManuals Logo
Home>Synesso>Coffee Maker>MVP Series

Synesso MVP Series User Manual

Synesso MVP Series
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
67
SYNESSO Annual Warranty Checklist
Replace portalter gaskets
o 8.5mm = 1.3441 (standard size)
o 9.0mm = 1.3430 (for older handles with worn ears)
Replace group diuser screens
o Synesso reinforced screen 1.3292
Inspect portalter baskets for wear or damage. Replace if necessary
o 14 gram basket=1.7000
o 18 gram basket=1.7090
o 21 gram basket=1.7170
Rebuild or replace steam valves. Clean and lubricate wand pivot ball and pusher face
o Rebuild kit = 1.7320
o Complete valve = 1.4501
Remove and clean steam ps
Remove side and splash panels, inspect tanks, copper tubes, and all ngs for leaks
Inspect and clean all ruby ow restrictors and brew valves
o Ruby jet replacement kit = 1.3191
o Brew valve = 1.2460
Inspect brew valve drain manifold. Replace worn or cracked drain hose
o Drain manifold black hose= 1.3261
Check ow rate at each brew group. 2 oz water in 6-8 seconds
Test consistency and accuracy of volumetrics across all groups
Check that expansion valve does not leak at 9bar. 11-12 bar is the factory standard seng
o Expansion valve = 1.4070
Check line, bypass, and pump pressures
Replace steam tank vacuum breaker
o Vacuum breaker = 1.4265
Inspect steam tank pressure relief valve (dark spots may indicate leaking). Replace if signs of leaking.
o Pressure relief valve = 1.4102
Depressurize steam and brew systems, check that gauges return to zero. Replace if not accurate.
o 0-60psi steam gauge = 1.4083
o 0-300psi brew gauge = 1.3373
Remove and inspect level probes. Clean scale build up if necessary
o Upper level probe (ll probe) = 1.4111
o Lower (safety) probe = 1.4112
Inspect sight glass and drain valve for leaks. Rebuild if signs of leaking
o Sight glass repair kit= 1.7337
Inspect drain hose for clogs or leaks
Check element gaskets for signs of leaking, ghten if needed
Test handheld controller for proper operaon. All buons react as normal
Authorized Technician Signature and Date _________________________________
Customer Name: _____________
Machine Model: ______________
Serial Number: _______________

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Synesso MVP Series and is the answer not in the manual?

Synesso MVP Series Specifications

General IconGeneral
BrandSynesso
ModelMVP Series
CategoryCoffee Maker
LanguageEnglish

Related product manuals