8
Total Dissolved Solids (TDS) 30 to 200 ppm (parts per million)
Total Hardness - in ppm 50 to 85 ppm
Total Hardness – in grains 3 to 5 grains (divide ppm by 17.1 to get grains)
pH 6.5 pH to 8 pH
Chloride 5-15 ppm – any Chlorides can be corrosive and harmful
Total Alkalinity Less than 100 ppm
Chlorine 0 ppm
Iron 0 ppm
Water Standards to keep
your warranty valid:
In Synesso’s experience, Everpure Claris and Cirqua formulator systems can produce a
result that can damage the Synesso™ stainless steel tanks. Use of either system is high-
ly discouraged and will void the water related parts of the machine warranty.
Any part which is determined to be defecve in materials or workmanship should be returned to
Synesso™ or to an authorized service locaon, shipping costs prepaid, as Synesso designates. Synesso
may repair or replace the product or part with new or factory refurbished equipment at Synesso’s sole
discreon. If the product or part is determined to be defecve and in compliance with the Limited War-
ranty condions, the replacement part or product will be returned to the purchaser with shipping pre-
paid **.
Many jurisdicons have codes and regulaons governing sales, construcon, installaon, and/or use of
products for certain purposes, which may vary from area to area. While Synesso aempts to assure that
its products comply with such codes, it cannot guarantee compliance and cannot be responsible for how
the product is used or installed.
Synesso’s liability is limited to the purchase price of the product and shall not be held liable for damages
that extend beyond the product itself. Synesso’s liability of consequenal, incidental damages, indirect
or direct damages for personal injury, inability to properly use this product, loss of business prots or
interrupon to business is expressly disclaimed.
** Regarding equipment sold or residing outside the United States: purchaser maybe required to pay for
the shipping and associated costs for warranty parts, repairs and services. Please contact your local dis-
tributor to resolve the issue regionally, if possible.
Proper water ltraon and regular lter changes are a requirement to keep your factory warranty
valid and your machine funconing properly. It is highly recommended that you contact a profession-
al water ltraon specialist in your area and have your water tested to determine the proper ltra-
on system. It is important to note that many municipalies change their water sources throughout
the year, so addional water tests may become necessary.
WARRANTY & WATER STANDARDS
To Next Page
Loading...
Need help?
General
