CyFlow
™
Space | Operating Manual | March 2021
7
2.6 What standards were applied for CE compliance?
The system described in this manual is marked with a CE-mark, which
confirms the compliance with the essential requirements of the following
European Directives:
2014/35/EU on electrical equipment designed for use within certain
voltage limits
2014/30/EU on electromagnetic compatibility
2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment
2.7 What typographical conventions are used in this manual?
Read the Operating Manual as well as the associated labelling thoroughly before using
the device. Please keep the Operating Manual for future reference.
The Operating Manual will help operating the device. Emphasis lays on installation, start-
up and safe operation of the device.
If you have any questions about the content of the Operating Manual or operating the
device, please contact your local Sysmex representative.
2.7.1 Symbols in this document
To make warnings more accessible, the following symbols are used to reference the kind
of hazard
1
.
Hazard
symbol
Meaning
General hazards
Biological hazards
Laser radiation hazards
Electrical hazards
Beware of electrical currents and electrical shocks.
2.7.2 Safety information
Safety information and warnings are marked by symbols and signal words. Hazards are
categorized into four levels. All warnings are structured according to the same model. The
type of hazard is stated after the signal word. Then the consequences that may result
1
These symbols are in black and white throughout this document, even though they appear in
colour on the device. Their meaning is unchanged.
To Next Page
Loading...
Need help?
General
