Systec D-45 - Preparing for Commissioning; Unpacking and Setting up the Device

V/D S ERIES
C OMMISSIONING
Revision: 2.1 2-3
2.1 Preparing for commissioning
2.1.1 Unpacking and setting up the device
D-23, D-45
The device should always be unpacked and set up by two
people!
Because of its size and weight, we recommend that two people
unpack and set up the device.
D-65 – D-200
The device
should always be unpacked and set up by four
people!
Because of its size and weight, we recommend that four people
unpack and set up the device.
The device is delivered in its transport packaging on a pallet.
• Remove the transport packaging.
Only lif
t the device by its base frame! Always wear safety
gloves!
Only lift the device by its base frame, not by the handles or the
recessed grips in the door. Wear safety gloves to avoid injuries
caused by sharp edges.
• Dispose of the pallet and the transport packaging in accordance with
national regulations.