V/D
S
ERIES
N
OTES ON THE DOCUMENTATION
Revision: 2.1 1-3
1.2 Safety instructions
− Observe the safety instructions in the operating manual.
− Failure to do so can result in damage to the device, fire or other
hazards.
− Components may only be serviced or replaced by authorised service
engineers.
− Before any work on the device, isolate it and prevent it from being
switched on again. Pay attention to all circuit breakers, as these carry
dangerous high voltages.
− When working on the device, avoid contact with parts which move
automatically.
1.3 Warning instructions and safety signs
In addition to the basic and specific safety instructions, risks can arise
through dangerous working procedures.
These procedures are indicated as follows:
These points warn of a danger of serious or fatal injuries.
Instructions on preventing the danger must be followed. A
safety sign corresponding to the particular type of danger gives
an additional warning.
These points refer to possible material damage.
Follow the instructions exactly to prevent incorrect operation
or destruction of the device.
1.4 Supplementary instructions
In addition to the basic procedures, there are possible variations which are
indicated as follows:
These points provide information on additional or alternative
procedures that are possible under certain circumstances,
for example.
To Next Page
Loading...
