IP30 Label Printing Scale Operation Manual
5.2.3.3.3. Pre-Pack Mode – Repeat Print
It’s allows to do the print multi labels automatically when the printed label removed
By item/weight package settings operation as per the section 2.2.3.3.1 & 2
PS: Must be choose the function, Operation Settings > Print after paper is removed > ON for printing next
label when the printed label removed
5.2.3.3.4. Pre-Pack Mode – Manual Print
It’s allows to do the print manually by pressing key when the loaded item gets stable and should be
return to zero and load an item for operation .
5.2.3.4. Non PLU - Weight item Operation
a) Click the key input unit price for the item and follow to click OK to confirm
b) Place the item on the pan and wait toget weight stable,
c) Then press key to get print out label. Label will be print “Other” instead of product name
d) Remove item from the pan for the next operation
Note: By pressing key allows clearing the current unit price, or Click the key toinput new
unit price..
5.2.3.5. Non PLU - Non- Weighed Item/ PCS Operation
a) Click the key input unit price for the item and follow to click OK to confirm
b) By clicking key or By clicking Quantity Window allows to input required PCS value
To Next Page
Loading...
Need help?
General
