Taarup 7640 - 9.4 Manual mode [M]; 9.5 Semi-automatic mode [A]

35
9.4 Manual mode [M]
Selected by the key F1. Only possible when the
display indicates [Cyk].
Manual mode is indicated by [M] in the display.
All functions are manually operated.
Bale- and wrap counter is activated.
9.5 Semi-automatic
mode [A]
Selected by the key F1. Only possible when the
display indicates [Cyk].
Manual mode is indicated by [A] in the display.
The loading arm and table are manually operat-
ed.
Wrapping, film release and film cutting is auto-
matic. The wrapping process is activated by
keeping the joy-stick in wrapping position until
the programmed no. of sensor passes is
reached. Ref. 9.5.1.
9.5.1 Auto stop [ ]
The digit displayed indicates how many sensor
passes are required before the automatic wrap-
ping function is activated. The value can be
changed by pressing F3.
Alternatives: 1-5.
Digit 1 means that the operator can release the
joy-stick after one senor pass.
Digit 5 mean that the operator can release the
joy-stick after five sensor passes.
Operating model S