114 Working with Base Stations from Your PC TB9400/TN9275 Installation and Operation
© Tait International Limited May 2023
See the base station help for more information on configuring transmit or
marshaling delay (MBC-00006-xx).
5.4.16 Uploading Firmware to the Base Station
To upload firmware directly from the base station, go to Tools > Firm-
ware > Upload/Download.
5.4.17 SNMP Network Management
Tait base stations provide Management Information Bases (MIBs), to allow
network management using SNMP.
The Windows MSI installer includes Tait defined MIBs (look for a folder
labeled MIBs under Tait Applications in the Windows Start menu), and
they are also published on the Tait Technical support website: http://
support.taitcommunications.com/home
The following table summarizes the base station MIB files and indicates
with hardware and firmware application they apply to.
The “94Series” MIB applies to P25 and AS/IP operation for TB9400,
and TB7300 base stations.
The “93Series” MIB applies to DMR/MPT operation for all base sta-
tions.
File Hardware firmware Description
TAIT-COMMON-MIB.mib TB9400,
TB9300,
TB7300,
transportable
Any Common declarations for all
Tait products
TAIT-INFRA93-94SERIES-
COMMON-MIB.mib
TB9400,
TB9300,
TB7300,
transportable
Any Common declarations for Tait
base stations
TAIT-INFRA93-94SERIES-
TC-MIB.mib
TB9400,
TB9300,
TB7300,
transportable
Any Textual conventions: com-
mon type definitions for Tait
base stations
TAIT-INFRA94SERIES-TC-
MIB.mib
TB9400,
TB7300,
transportable
P25/AS-IP
P25/AS-IP
P25/AS-IP
Textual conventions: type
definitions for P25/AS-IP
operation
TAIT-INFRA94SERIES-
MIB.mib
TB9400,
TB7300,
transportable
P25/AS-IP
P25/AS-IP
P25/AS-IP
Monitored object definitions
for P25/AS-IP operation
To Next Page
Loading...
Need help?
General
