64 Installation TB9400/TN9275 Installation and Operation
© Tait International Limited May 2023
4.4.2 Working with Configurations
The WebUI page under Tools > Files > Configuration allows you to
manage your base station configuration. The base station can store up to 10
configurations internally.
New configurations are created on the base station and downloaded to your
PC. They can also be transferred from one base station to another, and can
be transferred from one firmware application to another.
It is important to note that not all configuration values apply to both
firmware applications e.g. DMR/MPT has color codes, and P25 has NAC
values.
When working with base station configurations, you can do the following:
■ Back up a configuration: store a snapshot of the base station’s current
configuration
■ Upload a configuration: copy a configuration from your computer to
the base station. You can develop a master configuration and upload it
to all the base stations in the network. Uploading a configuration adds
to the set of stored configurations but does not make that configuration
active.
■ Restore a configuration: make the selected configuration active
■ Download a configuration: copy the selected configuration to your
computer so that you can store it. To download a configuration file,
click on the name of the saved configuration in the list of saved
configurations.
■ Create a human readable configuration report: download and save
a text report of the base station’s configuration settings. You can use it
To Next Page
Loading...
Need help?
General
