TB9400/TN9275 Installation and Operation Installation 63
© Tait International Limited May 2023
Functional Tests
The following table provides an overview of the tests available using the
WebUI. Refer to the Help for full details of these tests.
Test Notes Menu
Receiver operation Requires a suitable RF source Diagnose > RF Interface > Receiver
Transmitter operation Requires connection to the
network
Diagnose > RF Interface > Transmitter
Synchronized transmit Checks the simulcast operation of
a channel group or the
transmitters in it
Diagnose > RF Interface > Synchronized
Transmit
Ping Checks the IP connection to
another device with an IP address
Diagnose > Connection > Network
NTP query Checks if the NTP-based time
synchronization is working
PMU mains failure Requires a DC backup supply Diagnose > Subsystems > PMU Control
Tests
Fan operation Checks the operation of each fan
individually
Diagnose > Subsystems > Fan Tests
To Next Page
Loading...
Need help?
General
