90 Working with Base Stations from Your PC TB9400/TN9275 Installation and Operation
© Tait International Limited May 2023
5 Working with Base Stations from Your
PC
The web browser on your PC provides a window into the TB9400 base
station. Use it to connect to the base station so that you can monitor,
configure, diagnose, and calibrate it (if required).
This section describes the following:
■ Connecting to the base station, including initial setup
■ Working with base station web pages
■ Carrying out basic tasks
This section provides an overview of some aspects of the WebUI. Refer to
the Help for detailed instructions.
5.1 PC Recommendations
We recommend the following PC hardware and software for connecting to
a TB9400 base station:
■ SVGA Monitor (1024 x 768 minimum)
■ Network connection
■ The base station works with recent versions of most modern browsers.
Refer to the Release Notes for more information on currently supported
browsers.
5.2 Connecting your PC to the Base Station
You connect to a base station using your web browser. You can view
multiple base stations at once by using multiple browser windows or tabs.
Base stations have a web-based interface that provides the pages you view.
Up to ten users may be logged in to a base station at once.
When loading the WebUI with Internet Explorer, the web page may go
blank. To fix this, refresh the page with the ‘F5’ key.
The base station has three different user access levels:
■ Administrator
■ Maintainer
■ Monitor
To Next Page
Loading...
Need help?
General
