Tait TB9400 User Manual

52 Operation TB9400/TN9275 Installation and Operation
© Tait International Limited May 2023
Rear View
The indicator LEDs on the rear of the reciter and receiver are on the
Ethernet connector.
These LEDs provide the following information about the state of the reciter
and receiver:
Series 2
10Base-T Ethernet The green Ethernet connector LED will flash and the amber LED will be
off if the connection is running at 10 Mbits/s.
100Base-T Ethernet The green Ethernet connector LED will flash and the amber connector will
be on if the connection is running at 100 Mbits/s.
Series 1
10Base-T Ethernet The green Ethernet connector LED will be on and the amber LED will be
off if the connection is running at 10 Mbits/s.
100Base-T Ethernet The green Ethernet connector LED will be off and the amber connector will
be on if the connection is running at 100 Mbits/s.
Figure 3.3 Indicator LEDs on the rear of the reciter and receiver
b
10Base-T Ethernet Connector LED (green)
c
100Base-T Ethernet Connector LED (amber)
b
c

Tait TB9400 Specifications

General

Brand	Tait
Model	TB9400
Category	Accessories
Language	English