Prior to using the transceiver for the first time，the
battery pack must be fully charged for optimum life
and operation.
*Approximately 8 hours for the A36SE
5
NOTE: BE SURE to turn OFF the transceiver while charging with the supplied battery charger
Otherwise, the attached battery pack cannot be charged.
1. Insert the charger’s
power plug into a
120V AC outlet.
1.
Ensure that the charging indicator light turns red,
signaling that charging has begun.
2.
Charging typically takes about 8 hours. When the
indicator light turns green, it indicates that the
battery is fully charged.
1.
Place the battery or the walkie-talkie
with the battery installed onto the charging
base; alternatively, connect the USB
charging cable to the battery s USB port.
Charging Instructions:
To Next Page
