34
Excessive background
noise.
Too far away from other members
during communication.
Get closer to other members.
Poor location, such as being obstructed
by tall buildings or being in a basement.
Move to an open and flat area, then retry
powering on.
Avoid devices that may cause interference.
Interference from external environment
or electromagnetic sources.
INFORMATION
Fault Description Analysis Solution
· Measurements made without an antenna.
· All stated specifcations are subject to change without notice or obligation.
General
Frequency Coverage (Unit: MHz)
Australian Version
FM Radio：
VHF/UHF:
Receive Band:
Transmit Band:
Modes:
The number of Memory channels:
Usable temperature range:
Tuning steps:
Frequency stability:
Power supply:
Current drain:
Transmit
Receive (Maximum output)
Antenna connector:
Dimensions:
Weight (approximate):
Specifcations
88.00 ~ 108.00
136.000 ~ 174.000 (Guaranteed only 144.000~148.000 MHz)
400.000~480.000 (Guaranteed only 476.425~477.400 MHz)
476.425~477.400 MHz
M12B5UV3
80 channels
–20°C ~ +60°C, –4°F ~ +140°F
2.5 5.0 6.25 10.0 12.5 20.0 25.0 50.0 kHz ±2.5 ppm
(–20°C ~ +60°C, –4°F ~ +140°F)
7.2 V DC nominal
2.5 A or less
600 mA or less
SMA (50 )
51.21 (W) x 122.0 （H) x 38.55（D) MM
264g
To Next Page
