ADDING IP PHONES TO TALKSWITCH 13
b) Use the phone to enter a valid available extension number.
c) Press the down arrow key on the TS-9112i, TS-9133i or TS-9143i, or press the Enter
softkey on the TS-480i. The phone displays the following prompt.
If you have not entered a valid available extension number, the phone returns to step a).
d) Press the down arrow key on the TS-9112i, TS-9133i or TS-9143i, or press the Reboot
softkey on the TS-480i. The phone reboots, and then displays the date, time, extension
number, and number of voicemails (if any). The phone is available for use, but you can
configure additional features with the TalkSwitch Management software.
Adding the extension to the TalkSwitch system
1. Launch the TalkSwitch management software.
2. Select the Local Extensions/Fax page.
3. Click the Add button. The Add User / Extension window appears.
4. Set the Extension type to IP Extension.
5. In a multi-unit system, select the TalkSwitch unit the extension will be associated with. This
unit will hold the voicemail for the extension. Click Next.
TS-9112i TS-9133i, TS-9143i TS-480i
Done! Reboot Now
^=Cancel v=Enter
Done! Reboot Now
^=Cancel v=Enter
Success!
Reboot the phone
To Next Page
Loading...
