ADDING IP PHONES TO TALKSWITCH 15
• You can enter the Phone MAC Address manually. This is the required method if you are
setting up an external IP extension. The MAC Address is a 12-digit alphanumeric string
located in the barcode on the bottom of the phone and the box the phone came in.
Click Finish.
10. In the Extension tab, select the language for prompts heard by the user of the extension in
the System Prompt Language list. Setting the prompt language will also change the language
for text displayed on the phone itself.
11. Choose File > Save. The system will create a configuration file that the phone will download
when the phone is restarted.
IP extension details area
If you connected a TalkSwitch TS-9112i, TS-9133i, TS-9143i or TS-480i IP phone to the LAN and
used it to select an extension number, the IP Extension Details area for that extension will be
complete.
If necessary, perform the following steps:
1. Set the Location. Choices are:
• Internal — The phone is an internal IP extension located within the office, and is
connected to the same LAN as the TalkSwitch unit.
• External — The phone is an external IP extension located outside the office, and is
connected to the TalkSwitch unit over the internet. See External IP extensions on page 2.
2. If you set Location to External, select the Time Zone that matches the location of the
IP phone.
Warning: Calls to an emergency service number using an external IP extension will not send
the correct address to the emergency operator. We strongly recommend that you apply a
warning label to any external IP extension stating:
If an emergency call is made from this phone, you must provide your address to the
emergency operator.
To Next Page
Loading...
